pHduino Datalogger shield released

Feliz Ano Novo!

De pHduino Datalogger

At the begin of the 2010, I developed a datalogger shield for the pHduino. Again, I decided to make something simple to mount, modify, and use. I put the project in stand by because I need improve the code. Yesterday, I resolved make the modifications and I released it today. You can download the hardware and firmware files from the page of the project.

pYpHpoT Python Script v0.1 released

Olá.

This post is about first release of the pYpHpoT python script. It is a simple python script that reads the data from the pHduino and plots and saves the data to a text file.

pHduino Firmware v041 released

Hi everybody.

It is a newest release of the pHduino firmware with some little modifications. The most import addition is a magic number to simplify the pHduino operation.

pHduino Firmware v04 released

Again, one more pHduino firmware release. Two main features: pH alarm, to warn when the pH is out of the normal range, and save parameters in the Arduino EEPROM memory, to recover the last configuration after a reset or a power off.

Changelog v04_20090920

• Changed file name from phduino.h to pHduino.h.
• Added codename version.
  
• Added function to set the pH range for the pH alarm. 
  
• Added pH alarm signals: LED, beeps, message by serial port and LCD.
• Added feature to save parameters in the EEPROM memory of the Arduino board.
• Added function to reset parameters in the EEPROM.

This is the newest list of commands.

cmd help

cmd phduino start|stop

cmd interval_ms INT

cmd set_temp_sensor on|off

cmd set_temp FLOAT

cmd set_ph_alarm TEMP_INF TEMP_SUP

cmd ph_alarm on/off

cmd reset

The code still fits in an Atmega168.

If you are using the pHduino in some project, send me the link to make a post about your project. I will really appreciate post a list of links about related projects.

Blog
http://phduino.blogspot.com

Project
http://code.google.com/p/phduino

pHduino Firmware v03 released

This is the newest version of the pHduino firmware. Now you can configure it using a serial port communication.

• Fixed comment about time of one 60Hz cycle in phduino.h file.
  
• Added time for 50Hz power line.
  
• Added command line feature to configure the pHduino.
  
• Added option to work without temperature sensor by setting a temperature value by command line.
  
• Added option to configure the time interval between acquisitions.
  
• Added option to start/stop data sending by serial.
  
• Added a help function.

I decided to use a command line function described in the Arduino forum, because I can write command close to the spoked language. This the output help function.

cmd help
cmd phduino start|stop
cmd interval_ms INT
cmd set_temp_sensor on|off
cmd set_temp FLOAT

For example, to make pHduino stop to send data, send the command "cmd phduino stop" (without quotes, of course). Interval time option configures the time interval between acquisitions in mili seconds (use values greater than 500). INT is an integer value and FLOAT is a decimal point value.

Now you can use it without the LM35 temperature sensor. For this, pass the command "cmd set_temp_sensor off" and set a temperature value. For example, "cmd set_temp 18.4" to set 18.4 celcius degrees up.

There is no problem using the serial terminal of the Arduino software. However, using a serial terminal program you need set to send strings without line end characters [carry return (CR) and linefeed (LN)]. I made tests using the cutecom (very common in Linux distributions) and it worked fine. For Windows users I suggest to use the Realterm. Mac OSX users can use the screen program.

pHduino Project
http://code.google.com/p/phduino

pHduino 0.2 released

A new pHduino hardware version was released. The problem about sensor voltage offset compensantion was resolved. See the changelog for the changes.



Changelog - Hardware version 0.2

• Fixed the problem of the offset signal amplification before the compensation.
  
• Increase the value of the resistors to reduce the electric current consume (Dr. do Lago).
• Changed the charge pump inverter capacitors from 1000uFx6.3V to 100uFx25V.
  
• Removed zener diode and trimpot used to adjusts the voltage reference by a resistor of fixed value.
  
• Added a ADC channel to reads the reference voltage.

History

Friday, August 21, before to get sleep, I had an idea to resolve the offset signal compensation problem with gain. On Saturday and on Sunday, I changed the PCB layout and did a clean-up on the firmware code.

On Monday, 24, I changed the electronic circuit of the first version to the new circuit. Dr. do Lago helped me selecting the right value of the resistors to reduce the current consume.

On Wednesday, 26, my friend Mr. Vidal, realized a comparative test between the pHduino and a pHmeter from a commercial brand using a titration of HCl with NaOH in a didactic laboratory. He said me the pHduino worked fine. The results I will show soon.

On Friday, 28, I made a PCB with the new layout, on Saturday, 29, I bought more electronic components and I mounted the circuit at my home toolshop.

Today, Monday, 31, I took some new shots of the circuit mounted.

The solution

The basic idea to resolved the main problem is apply an adjustable electric potential, using a trimpot, at the place of the voltage divider ground of the non-inverter amplifier (Stage1). Dr. do Lago deduced for me the equation for the Stage1.



I know that this point does not have a low impedance. I should put a follower voltage. However, the current that flows by the R1 and R2 is about 100 times lesser than the current that flow by the voltage divider (defined by R3, R4, and R5) that applies the voltage offset at R1. This circuit is suitable for this application.

pHduino Project
http://code.google.com/p/phduino